1 |
Containment support components are cracked, deteriorated or missing. The cover and supporting components that are defective shall be replaced with factory manufactured components. - ATG riser ground cover deteriorated - repair or replace |
Facility |
Electrical Does Not Comply - ATG riser RUL |
Facility |
Miscellaneous - 174.370- Unable to open dispenser 5/6 side panel to verify corrosion protection and shear valve height. |
1, 2, 3 |
Miscellaneous - 175.510d-Submersible pump(s) is/are in direct contact with soil/earth, which is corroding the exposed steel. Install approved cathodic protection to prevent further corrosion of submersible pump and related piping components. |
3 |
Open electrical conduit or junction boxes. - ATG riser RUL |
1, 2, 3 |
Precision tank test required. - A tank precision test is required because of missing passing monthly leak reports. |
1, 3 |
Required monthly tank leak test records not available. - Missing monthly passing reports for the last ten months. |
2 |
Spill prevention equipment contains liquid/debris and must be cleared of materials and maintained clean and dry. |