Division of Petroleum & Chemical Safety

Pay Tank Fees Online Print Detail Page Export to Excel

Facility Details

Facility Number:	2027433
Status:	Active
Facility Name:	IL0078
Address:	3514 Route 31 McHenry, IL 60050
County:	McHenry
Property Parcel:	09-14-300-028
Facility Type:	Attended Self-Service Station
Owner Type:	Private
Green Tag Decal:	Y002722
Green Tag Issue Date:	5/31/2023
Green Tag Expiration Date:	12/31/2025

Owner Details

Owner Name:	Lehigh Gas Wholesale Services
Owner Address:	645 Hamilton, Suite 400 Allentown, PA 18101
Owner Status:	Current Owner
Purchase Date:	9/27/2016
Type of Financial Responsibility:	Surety Bond
Financial Responsibility Reporting Due Date:	6/6/2026

Motor Fuel Dispensing Permits

MFD Permit Type	Issue Date	Expiration Date
Self Service	5/31/2023	12/31/2025

Owner Summary

Click for Facility/Tank Ownership history

Owner Number	Owner Name	Owner Status	Purchase Date
U0037337	Lehigh Gas Wholesale Services	Current Owner	9/27/2016
U0025164	BAPA, LLC & PT, LLC	Former Owner	5/23/2012
U0032045	Petromax	Former Owner	9/2/2003
U0032455	The Premcor Refining Group, Inc. c/o Valero Energy Corporation	Former Owner	2/1/1995
U0024983	Clark Refining & Marketing, Inc.	Former Owner	11/22/1988
U0014487	S & S Petroleum	Former Owner	12/31/1967
U0029789	Clark Retail Enterprises, Inc.	Former Owner
U0028787	Clark Retail Enterprises, Inc.,	Former Owner

Permits (Unexpired)

Click for permit history

No Active Permits Found

Notice of Violatlions (Current)

NOV Number: E0020251692 (Pending) Issue Date: 7/7/2025 Expiration Date: 9/5/2025 View NOV Form

Tanks	Violations
Facility	Attendant does not have means to remotely monitor or no emergency shutoff switch 20' to 50' from dispenser - Section 175.210g; All dispensing units shall be readily visible from the control station without assistive devices. If view is permanently obstructed, or the dispenser is located so that activity is not readily visible, closed-circuit cameras that provide a view of each side of the dispensing unit and project an image on a screen at least 6 inches in diagonal located at the control station may be used. You may also elect to install an emergency stop switch at least 20 feet but no more than 50 feet from any dispenser with a permanently obstructed view.
Facility	Code complying instruction/warning signs are not properly mounted at each dispenser island - Self-service instructional signs at dispensers are missing or do not meet minimum requirements. Install appropriate signage. ONLY HAZARD SIGNS ARE POSTED. INSTALL PROPER SIGNAGE.
Facility	Farthest dispenser is greater than 40' and site lacks a communication system or system is inoperable - Intercom system not functional; repair/replace as necessary to provide communication at dispensers.

NOV Number: E0020251696 (Pending) Issue Date: 7/7/2025 Expiration Date: 9/5/2025 View NOV Form

Tanks	Violations
1, 2, 3	Containment support components are cracked, deteriorated or missing. The cover and supporting components that are defective shall be replaced with factory manufactured components. - Section 175.410 Submersible, Under-dispenser, Transition and Other Containment Sumps a) All containment sumps must consist of a factory manufactured containment that is liquid-tight on its sides, bottom and at any penetrations and is compatible with the substance conveyed by the piping. Such containment shall also have a factory manufactured protective cover and supporting components that are properly maintained. If the protective cover or its supporting components are cracked, deteriorated or missing, the cover and supporting components that are defective shall be replaced. SPECIFICALLY ALL 3 STP LIDS MISSING HANDLES.
1	Spill prevention equipment contains liquid/debris and must be cleared of materials and maintained clean and dry.

Tanks

Violations

1, 2, 3

Containment support components are cracked, deteriorated or missing. The cover and supporting components that are defective shall be replaced with factory manufactured components. - Section 175.410 Submersible, Under-dispenser, Transition and Other Containment Sumps a) All containment sumps must consist of a factory manufactured containment that is liquid-tight on its sides, bottom and at any penetrations and is compatible with the substance conveyed by the piping. Such containment shall also have a factory manufactured protective cover and supporting components that are properly maintained. If the protective cover or its supporting components are cracked, deteriorated or missing, the cover and supporting components that are defective shall be replaced. SPECIFICALLY ALL 3 STP LIDS MISSING HANDLES.

Spill prevention equipment contains liquid/debris and must be cleared of materials and maintained clean and dry.

IEMA Numbers Associated with the Facility

No IEMA Numbers Found

LUST Fund Eligibility and Deductibility Determinations

IEMA Number	Status	OSFM Received Date	OSFM Response Date	Deductible
99-2728	Eligible	12/5/2001	12/11/2001	$10,000
99-2728	Returned	12/6/2004	12/27/2004	$Not Selected
99-2728	Eligible	4/8/2005	5/17/2005	$10,000
99-2728	Eligible	9/10/2012	10/24/2012	$10,000

Pay Tank Fees Online

Tank Information

Tank Number	Capacity	Product	Status	Regulated Status	Fee Due
1	12000	Gasoline - Premium	Currently in use	Federal	$0.00
2	12000	Gasoline - Regular	Currently in use	Federal	$0.00
3	12000	Gasoline - Regular	Currently in use	Federal	$0.00

Dispenser Information

Name\ID	Status
1/2	Active
3/4	Active
5/6	Active
7/8	Active
9/10	Removed
11/12	Removed

MFD Motorfuel Dispensing Forms

No Forms Found