Division of Petroleum & Chemical Safety

Motor Fuel Dispensing Permits

MFD Permit Type	Issue Date	Expiration Date
Self Service	1/17/2023	12/31/2025

Owner Summary

Click for Facility/Tank Ownership history

Owner Number	Owner Name	Owner Status	Purchase Date
U0023695	Meijer Great Lakes Limited Partnership	Current Owner	5/3/2001

Permits (Unexpired)

Click for permit history

Permit Number	Type	Status	OSFM Receive Date	Issue Date	Expiration Date	Documents
00253-2025UPG	Upgrade	Approved / Issued	3/4/2025	3/4/2025	9/4/2025	Documents

Notice of Violations (Current)

NOV Number: E0020250675 (Pending)    Issue Date: 3/14/2025    Expiration Date: 5/13/2025    View NOV Form

Tanks	Violation
Facility	Code complying instruction/warning signs are not properly mounted at each dispenser island - Self-service instructional signs at dispensers are missing or do not meet minimum requirements. Install appropriate signage. MISSING SIGNS AT DISPENSERS #10, & 11/12 BOTH SIDES.
Facility	Farthest dispenser is greater than 40' and site lacks a communication system or system is inoperable - Intercom system not functional; repair/replace as necessary to provide communication at dispensers.
Facility	Remove brush, debris, wood chips or mulch located within 10' of dispensers - Remove combustible materials from the area of the listed dispenser(s).

NOV Number: E0020250676 (Pending)    Issue Date: 3/14/2025    Expiration Date: 5/13/2025    View NOV Form

Tanks	Violation
2	Containment support components are cracked, deteriorated or missing. The cover and supporting components that are defective shall be replaced with factory manufactured components. - Section 175.410 Submersible, Under-dispenser, Transition and Other Containment Sumps a) All containment sumps must consist of a factory manufactured containment that is liquid-tight on its sides, bottom and at any penetrations and is compatible with the substance conveyed by the piping. Such containment shall also have a factory manufactured protective cover and supporting components that are properly maintained. If the protective cover or its supporting components are cracked, deteriorated or missing, the cover and supporting components that are defective shall be replaced. SPECIFICALLY THE NORTH REGULAR STP LID IS MISSING THE HANDLE.
Facility	Missing list of designated Class A/B & C Operators - A comprehensive list of Class A / B / C Operator(s) shall be maintained on site and must be current.
1, 2, 3, 4	Monthly line interstitial sensor records not available. - Maintain one NORMAL report per LINE, per month, from ATG. Must maintain 24 months’ worth.
1, 2, 3, 4	Precision tank test required. - Precision tank test is required on tank(s) if you cannot provide 24 months’ worth of tank “PASS” from ATG.
1, 2, 3, 4	Required monthly tank interstitial sensor records not available. - Maintain one NORMAL report per TANK, per month, from ATG. Must maintain 24 months’ worth.
4	Spill prevention equipment contains liquid/debris and must be cleared of materials and maintained clean and dry.
4	Submit Notification Form For Tank Status Change - Submit OSFM Notification Form placing all tanks in Temporarily Out of Use status. The Notification Form is available at https://webapps.sfm.illinois.gov/USTPortal/NotificationForm. This form is required to be submitted within 30 days of a tank status change.

IEMA Numbers Associated with the Facility

No IEMA Numbers Found

LUST Fund Eligibility and Deductibility Determinations

No Applications Found

Dispenser Information

MFD Motorfuel Dispensing Forms

No Forms Found